China Best Sales 1 Ton 2.5 Ton 5 Ton High Lifting Capacity Hand Crank Screw Jack Lift Worm Gear Screw Jack gear patrol

Product Description

1.Convenient to adjust
2.Wide range of ratio
3.Easy to install
4.high torque
Application Industries:
Our SWL series screw jacks are widely used in the industries such as metallurgy,mining,hoisting and transportation, electrical
power,energy source,constrction and building material,light industry and traffice industry

Screw Jacks in construction

Often found in climbing mechanism of construction,the screw jacks use physical means to raise and lower loads, which typically range from 5 tons to 30 tons. A screw jack is a common type of mechanical jack, which works via a motor and gearbox by an operator. A screw uses the shape of its threads to raise or lower the load, or a traveling nut does the lifting while the screw turns in place. Mechanical jacks are self-locking(not for ball screw), which means that when power is removed from the jack, the screw stays in place until power resumes. This setup makes mechanical jacks safer than their hydraulic counterparts, because users don’t have to fear a loss of power. The main components of screw jacks are; trapezoidal lifting screw also known as lead screw, worm screw, worm gear and gear housing. A worm screw is rotated manually or by a motor. With the rotation of the worm gear, the lead screw in it moves upwards or downwards linearly. The feed rate of the screw depends on the turning speed, the number of teeth of the gears and the size of the screw pitch. In some models of jackscrews, The lifting screw does not move up and down. It only rotates around its axis. A lifting nut (also known as a travelling nut) moves along the lead screw. The lifting nut of the screw jack is made of bronze to decrease friction.

Product Parameters

MODEL

 

SWL2.5

SWL5

SWL10

SWL15

SWL20

SWL25

SWL35

Maximum lifting force (kN)

 

25

50

100

150

200

250

350

Screw thread size

 

Tr30*6

Tr40*7

Tr58*12

Tr58*12

Tr65*12

Tr90*16

Tr100*20

Maximum tension (kN)

 

25

50

99

166

250

350

Worm gear ratio (mm)

P

1/6

1/8

3/23

1/8

3/32

3/32

 

M

1/24

1/24

1/24

1/24

1/32

1/32

Worm non rotating stroke (mm)

P

1.0

0.875

1.565

1.56

1.5

1.875

M

0.250

0.292

0.5

0.5

0.5

0.625

Maximum elongation of screw rod under tensile load (mm)

 

1500

2000

2500

3000

3500

4000

Maximum lifting height at maximum pressure load (mm)

The head of the screw rod is not guided

250

385

500

400

490

850

820

Lead screw head guide

400

770

1000

800

980

1700

1640

Worm torque at full load(N.m)

P

18

39.5

119

179

240

366

464

M

8.86

19.8

60

90

122

217

253

efficiency(%)

P

22

23

20.5

 

19.5

16

18

M

11

11.5

13

 

12.8

9

11

Weight without stroke(kg)

 

7.3

16.2

25

 

36

70.5

87

Weight of screw rod per 100mm(kg)

 

0.45

0.82

1.67

 

2.15

4.15

5.20

Detailed Photos

 

 

 

SWL Series worm screw Jack:

1.The elevator is a combination of turbine pair and trapezoid screw rod to complete the lifting and lowering of objects. 2.Compact structure, light weight, safety and reliability, long service life, convenient installation

3.Self-locking function in the static state.

 

1. screw rod

2. nut bolt

3. cover

4.Skeleton oil seal

5.Bearing

6.Worm gear

7.Oil filling hole

8.Case

9.Skeleton oil seal

10.Cover

11. nut bolt

12.Bearing

13.Skeleton oil seal

14.Bearing

15.worm

16.Flat key

17.Bearing

18.Skeleton oil seal

19.Cover

20.Nut bolt

Product Description

 

Related Products

 

Packaging & Shipping

 

Company Profile

 

Standard or Nonstandard: Nonstandard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Power Transmission
Product Name: Swl Series Worm Gear Lift
Input Speed: 0-1440rpm
Ratio: 6-36
Applicable Industries: Hotels, Manufacturing Plant, Food & Beverage Facto
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

screw gear

How does a screw gear impact the overall efficiency of a system?

A screw gear, also known as a worm gear, plays a significant role in the overall efficiency of a system. The design and characteristics of the screw gear can influence several factors that affect the system’s efficiency. Here’s a detailed explanation of how a screw gear impacts the overall efficiency of a system:

  • Gear Ratio: The gear ratio of a screw gear system determines the relationship between the input and output speeds. In a screw gear, the gear ratio is typically high, which means that a small rotation of the worm gear results in a larger rotation of the worm wheel. This high gear ratio allows for precise control and slow movement, but it also leads to a trade-off in terms of mechanical efficiency. The high gear ratio can result in a lower mechanical efficiency due to increased friction and power loss.
  • Friction and Efficiency: Screw gears inherently introduce more friction compared to other gear types due to the sliding motion between the worm and the worm wheel. This sliding action generates friction, which can reduce the overall efficiency of the system. The efficiency of a screw gear system depends on various factors, including the materials used, the lubrication, and the design parameters. Proper lubrication and the use of high-quality materials can help minimize friction and improve the efficiency of the system.
  • Lubrication and Efficiency: Adequate lubrication is crucial for reducing friction and maximizing the efficiency of a screw gear system. The lubricant forms a film between the contacting surfaces of the worm gear and worm wheel, reducing direct metal-to-metal contact and minimizing frictional losses. Insufficient or improper lubrication can lead to increased friction, higher operating temperatures, and reduced efficiency. Therefore, proper lubrication, including the selection of the appropriate lubricant type and viscosity, is essential for optimizing the efficiency of the system.
  • Backlash: Backlash refers to the play or clearance between the mating teeth of the worm gear and worm wheel. Excessive backlash can lead to energy loss and reduced efficiency. It can cause vibrations, impacts, and inefficient power transmission. Therefore, minimizing backlash through precise manufacturing and proper meshing of the gears is essential for maintaining high efficiency in a screw gear system.
  • Mechanical Efficiency: The mechanical efficiency of a screw gear system is influenced by various factors, including the design, manufacturing tolerances, lubrication, load conditions, and operating speed. In general, screw gears tend to have lower mechanical efficiency compared to other gear types, such as spur gears or helical gears. However, advancements in gear design, materials, and lubrication technologies have improved the overall efficiency of screw gear systems in recent years.
  • Application Considerations: The impact of a screw gear on the overall efficiency of a system also depends on the specific application requirements. Screw gears are commonly used in applications that prioritize precise motion control over high efficiency, such as in applications requiring heavy loads or precise positioning. In such cases, the advantages of screw gears, such as high gear ratios and self-locking capabilities, outweigh the potential efficiency trade-offs.

It is important to note that the overall efficiency of a system is influenced by multiple factors beyond the screw gear itself, including other components, power transmission losses, and system design. Therefore, when evaluating the efficiency of a system, it is essential to consider the collective impact of all components and factors involved.

screw gear

What are the potential challenges in designing and manufacturing screw gears?

Designing and manufacturing screw gears, also known as worm gears, can present several challenges that need to be addressed to ensure the successful production of high-quality gear systems. Here’s a detailed explanation of the potential challenges in designing and manufacturing screw gears:

  • Complex Geometry: Screw gears have complex tooth profiles and geometry, which can pose challenges during the design and manufacturing processes. The design must consider factors such as the helix angle, lead angle, and tooth shape to ensure proper gear engagement and efficient power transmission. Manufacturing these intricate geometries accurately can be technically demanding.
  • Manufacturing Tolerances: Achieving tight manufacturing tolerances is crucial for the proper functioning of screw gears. The gear components need to be precisely machined to ensure accurate tooth profiles, pitch, and concentricity. Maintaining these tight tolerances throughout the production process can be challenging, especially when working with materials that have dimensional variations or when scaling up production.
  • Machining and Grinding: The machining and grinding processes involved in manufacturing screw gears require specialized equipment and expertise. The use of multi-axis CNC machines, gear hobbing, or grinding machines is often necessary to achieve the required tooth profiles and surface finishes. These processes can be time-consuming and costly, requiring skilled operators and careful process control to ensure accurate and repeatable results.
  • Material Selection: Choosing the right materials for screw gears is critical to ensure durability, wear resistance, and efficient power transmission. Factors such as hardness, strength, and compatibility with lubricants must be considered. Selecting suitable materials that meet the specific application requirements can be challenging, particularly when balancing cost, performance, and manufacturing constraints.
  • Lubrication and Heat Dissipation: Screw gears require proper lubrication to reduce friction, wear, and heat generation. Designing effective lubrication systems and ensuring proper lubricant selection and distribution can be challenging. Heat dissipation is also a concern, especially in high-speed or high-torque applications, as excessive heat can affect gear performance and longevity. Adequate cooling methods or heat dissipation strategies may need to be implemented.
  • Backlash and Efficiency: Screw gears inherently exhibit some level of backlash due to the nature of their tooth engagement. Managing and minimizing backlash can be a challenge, as it affects the precision and accuracy of the gear system. Additionally, screw gears generally have lower mechanical efficiency compared to other gear types, which can be a concern in applications where efficiency is critical. Designing for improved efficiency and mitigating backlash can require careful consideration of gear parameters and materials.
  • Noise and Vibration: Screw gears can generate noise and vibration during operation, which can be undesirable in many applications. Designing for reduced noise and vibration requires careful consideration of gear tooth profiles, surface finishes, and lubrication. Balancing gear parameters and implementing vibration-damping measures can help mitigate noise and vibration issues, but it can be a complex task that requires extensive testing and iterative design improvements.
  • Cost and Manufacturing Scalability: Designing and manufacturing screw gears can be costly, especially when precision machining, specialized equipment, and skilled labor are involved. The cost of materials, heat treatment, and surface finishing processes can also contribute to the overall production cost. Additionally, scaling up production while maintaining consistent quality and meeting cost targets can pose challenges that require careful planning and optimization.

Addressing these challenges requires a combination of engineering expertise, advanced manufacturing techniques, and rigorous quality control. By carefully considering these factors during the design and manufacturing phases, it is possible to overcome the challenges and produce screw gears that meet the required performance, durability, and reliability standards.

screw gear

How do you choose the right size screw gear for your application?

Choosing the right size screw gear for your application involves considering several factors to ensure optimal performance and compatibility. Here are the key steps to follow when selecting a screw gear:

  1. Determine the Application Requirements: Start by understanding the specific requirements of your application. Consider factors such as the desired gear reduction ratio, torque requirements, rotational speed, load capacity, and precision positioning needs. Having a clear understanding of your application’s requirements will help guide the selection process.
  2. Calculate the Gear Ratio: Determine the required gear reduction ratio by considering the speed and torque specifications of your application. The gear reduction ratio is calculated by dividing the input speed by the output speed. This ratio will help narrow down the options for suitable screw gears.
  3. Evaluate Load Capacity: Assess the load capacity requirements of your application. Consider the maximum load that the screw gear needs to handle. This includes both the static load (the load when the system is at rest) and the dynamic load (the load during operation). Ensure that the selected screw gear can handle the anticipated loads without experiencing excessive wear or failure.
  4. Consider Torque Requirements: Determine the required torque output of the screw gear to meet the demands of your application. Calculate the torque by multiplying the load torque by the gear reduction ratio. Ensure that the selected screw gear can provide the necessary torque output to drive the load effectively.
  5. Analyze Speed and Efficiency: Evaluate the desired rotational speed and efficiency of the screw gear system. Consider the input speed, output speed, and efficiency requirements of your application. Ensure that the selected screw gear can operate within the desired speed range while maintaining the required efficiency levels.
  6. Check Mounting and Space Constraints: Assess the available space and mounting requirements in your application. Consider factors such as the required size, shape, and mounting configuration of the screw gear. Ensure that the selected screw gear can be properly installed and integrated into your application without any space or mounting constraints.
  7. Consider Material and Lubrication: Evaluate the environmental conditions and operating parameters of your application. Consider factors such as temperature, humidity, exposure to contaminants, and the need for corrosion resistance. Select a screw gear made from materials suitable for the application environment. Additionally, consider the lubrication requirements and ensure that the selected screw gear can be adequately lubricated for smooth operation and reduced wear.
  8. Consult Manufacturers and Suppliers: Seek advice and consult with manufacturers or suppliers of screw gears. They can provide valuable insights and recommendations based on their expertise and product knowledge. Provide them with the specific details of your application requirements for better guidance in selecting the appropriate screw gear.

By following these steps and considering the factors mentioned, you can choose the right size screw gear that matches the requirements of your application. It is crucial to ensure that the selected screw gear can handle the load, provide the necessary torque and speed, fit within the available space, and operate effectively in the application environment.

China Best Sales 1 Ton 2.5 Ton 5 Ton High Lifting Capacity Hand Crank Screw Jack Lift Worm Gear Screw Jack gear patrolChina Best Sales 1 Ton 2.5 Ton 5 Ton High Lifting Capacity Hand Crank Screw Jack Lift Worm Gear Screw Jack gear patrol
editor by CX 2023-10-12

Tags:

screw gears

As one of leading screw gears manufacturers, suppliers and exporters of products, We offer screw gears and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of screw gears

Recent Posts